Repair Clamps

One-piece Repair Clamp 44-330 mm

  • the clamp cannot be used for different pipe diameters (transitions)
  • radial length of damaged area max. 20% of pipe outside diameters
  • the repair clamp must be centred over the damaged area
  • R = maximum axial length of damaged area
  • test pressure = 1.5 x PS
  • comply with installation instructions
Components Materials
Casing 1.4301 / 304
Screws 1.4301 / 304
Bolts 1.4301 / 304
Sealing sleeves Temp.: -5°C to +25°C
NBR Media: all water qualities, gas
R Clamp length
50 mm 200 mm
150 mm 300 mm
250 mm 400 mm

Trennung

 

 

 

 

 

 

Two-piece Repair Clamp 88-440 mm

  • the clamp cannot be used for different pipe diameters (transitions)
  • radial length of damaged area max. 20% of pipe outside diameters the repair clamp must be centred over the damaged area
  • R = maximum axial length of damaged area
  • test pressure = 1.5 x PS
  • comply with installation instructions
Components Materials
Casing 1.4301 / 304
Screws 1.4301 / 304
Bolts 1.4301 / 304
Sealing sleeves Temp.: -5°C to +25°C
NBR Media: all water qualities, gas
R Clamp length
50 mm 200 mm
150 mm 300 mm
250 mm 400 mm

Trennung

 

 

 

 

 

 

 

One and two-piece Repair Clamps for the safe and reliable repair of gas, water and
drainage pipes made from various materials.

 

Applications

  • Repair Clamps for sealing damaged gas, water and drainage pipes made from cast iron,
    fiber coment or PVC
  • sizes from DN 40 to DN 400
  • with standard NBR sealing sleeve

 

Working instructions

  • the repair clamp must be at least as long as the outside diameter of the pipe being repaired 

 

   Gas pipes: permitted working pressure 5 bar (< DN 300) 

   Water pipes: permitted working pressure

   < DN 200 PN 16

   > DN 200 PN 10

   > DN 300 on request

 

General

  • made from stainless steel
  • ideal for repairing large damaged areas up to 250 mm long
  • the large-surface waffle profile of the sealing sleeve reduces the required tightening torque, extending the life of the NBR material
  • integrated ergonomic hand grips for easy handling
  • no loose screws or parts when opening
  • both the one-piece and two-piece Repair Clamps are complete units
  • modern manufacturing methods, including pressure jointing, prevent changes in the material structure and stresses in the material
  • the Stainless Steel screws are permanently coated with Molykote, which prevents erosion
    of the screws and also greatly reduces the torque required
  • installation with standard tools (torque wrench with hex socket) – without extensions


D-79771 Klettgau-Erzingen • Saizig 5 • Germany
Tel. +49 (0) 7742 4399 • Fax. +49 (0) 7742 1083 • export@konex-international.com • www.konex-international.com