Towing Heads

 

 

 

 

 

 

 

 

  • for easy towing PE pipes
  • recommended if the PE pipe is not in contact with water
    or drilling fluids
  • easy to use, reusable, no additional tools required
  • rotating the Towing Head into the PE pipe
    results in a pull-out resistant connection for towing
    the PE pipe in the desired direction
  • spare parts available on request

                                                             

             Standard Version

 

 

 

 

 

 

 

 

 

 

  • for watertight connection between Towing Head and PE pipe
  • recommend if the PE pipe is in contact with water or drilling fluids
  • easy to use, reusable, no additional tools required
  • rotating the Towing Head into the PE pipe results in a pull-out resistant
    connection for towing the PE pipe in the desired direction
  • spare parts available on request

 

 

 

 

                                                                                 

                Sealed Version

1. towing eye with screw jack

2. upper cone outer sleve

3. expansion-gripper set

4. O-ring set

5. expander cone with internal thread

6. PE pipe

7. sealing, Sealed Version

 

Application

  • the Towing Head is fitted onto the end of the PE pipe
  • by rotating the Towing Eye (1) until tight its screw jack will be rotated into the expander cone (5)
  • then the expansion-gripper elements (3) are joggling with the inner side of the PE pipe (6)
  • it creates a stable connection: an increasing of towing forces leads to a tighter grip

Multible Towing Heads

  • Multiple Towing Head for easy towing several pipes in one go
  • towing of several pipes of various diameters is also possible
  • pipes of different diameters connected to standard Towing Heads
    can be attached to the (red) special Multiple Towing Bell for towing
    in a longintudinal direction
  • especially for fiber optic cable installations for simultaniously towing
    a number of pipes, even of different diameters
  • bundled PE protection pipes can be attached to the Multiple Towing
    Head and towed into a trench or a borehole
  • consists of a Towing Bell with a rear fitted plate to which different
    standard Towing Heads can be attached
  • available in different sizes to accommodate PE pipes of different
    dimensions and/or various quantities
  • the multiple Towing Heads keeps the ducts close to the reamer
    whereas the bell shaped head protects the leading edges of every
    pipe and simultaniously stabilizes the hole ahead of the pipes