Push-Fit Fittings

Push-Fit and Expansion Sockets

fix point type, PE-100/PP-r

  • EPDM lip seal ring Type 3S with KTW recommendation for drinking water 
  • optional: NBR lip seal, without clamp

Attention clamp may not exert a radial force on the fitting

Push-Fit Double Socket

fix point type, PE-100/PP-r 

  • EPDM lip seal ring Type 3S with KTW recommendation for drinking water
  • standard type without stop inside and without clamp
  • optional: with stop inside, with NBR lip seal

Attention clamp may not exert a radial force on the fitting

Push-Fit Double Socket, PN16

PE-100, patented 

  • PE-100 / PVC-U pull-out resistant long type Push-Fit Transition Coupling for PE-100 and PVC-U water pipes
    up to 16 bar
  • d 90 - d 225, SDR 17/11
  • body PE-100 RC*
  • EPDM elastomer ring generates pre-stressing
  • resistant to longitudinal forces due to resilient Grip element
  • EPDM lip seal ring Type 3S with KTW recommondation
    for drinking water
  • dirt repellent profile ring
  • DVGW approved for drinking water, Reg.No. DW-8616BU0210

 

* RC = crack resitsant

Push-Fit Repair Coupling
for PE-100 pipes up to 16 bar
patented

  • pull-out resistant Push-Fit Coupling for repairs in
    PE-100 water pipe systems up to 16 bar
  • d 90 - d 225, SDR 11
  • body PE - 100 RC*
  • EPDM lip seal ring Type 3S with KTW recommondation
    for drinking water
  • 3 Stainless Steel screws at the front for safe pre-stressing and
    restraining the POM Grip Ring
  • resistant to longitudinal forces due to resilient POM
    Grip Ring
  • DVGW Reg. No. DW86L6BO0310 / drinking water

 

* RC = crack resistant




  • zp1, zp3 = insertion depth / min
  • tolerance X ± 5 mm

Push-Fit Coupling with Flange, PE-100
patented

  • PE-100 pull-out resistant Push-Fit Coupling with RILSAN coated HP Flange DIN EN 1092-1, PN10 for connection, repair and transition of PE-100 water pipes up to 16 bar (for gas pipes on request)
  • d 90 - d 225, DN80 to DN150 / PN10 & 16, DN200 PN10, PN16 on request
    body PE-100 RC*
  • with POM Grip - Ring
  • EPDM lip seal ring Type 3S with KTW recommondation for drinking water
  • resistant to longitudinal forces due to resilient POM Grip Element
  • dirt repellent profile ring
  • DVGW approved for drinking water,
    Reg.-No. DW-8616BU0210, DV-4508BO0259

 

* RC = crack resitsant